Canon XF705, Инструкция по эксплуатации

Страница: 76 / 231

Adju s ting the Focu s
76
Pea k ing
The camcorder offers two peaking levels.
1 Press the PEAKING button.
• The peaking icon (
J
or
K
) appears on the left of the
screen and the outlines in the image will be emphasized,
depending on the focus.
• Press the button again to turn off peaking.
2 To select the peaking level, select [Peaking].
>
[
A
"
Assistance Functions]
>
[Peaking]
3 Select the desired level and then press SET.
Magnification
1 Press the MAGN. button.
•
^
appears on the left of the screen and the center of
the screen* is magnified 2 or 4 times.
• The orange frame displayed at the top right of the screen
(magnification frame) shows the approximate part of the
image shown magnified.
• Press SET to switch back and forth between 2x and 4x
magnification.
2 If necessary, use the joystick to move around the
magnification frame and check other parts of the image.
• You can also drag your finger across the screen to move
the frame.
• Press the CANCEL button to return the magnification
frame to the center position.
• Press the MAGN. button again to cancel the magnification.
* If one of the AF frames or a face detection frame is displayed on the screen, the area around the active frame will be magnified
instead.
NOTES NOTES
• About Peaking/Magnification:
- You can use the
>
[
A "
Assistance Functions]
>
[Peaking 1] and [Peaking 2] settings to set the
color, gain and frequency of the two peaking levels independently of each other.
- You can use the
>
[
A
"
Assistance Functions]
>
[Peaking: LCD], [Peaking: VF], [Peaking: SDI]
and [Peaking: HDMI] settings to turn the peaking function on and off separately on the LCD screen,
viewfinder and external monitors connected to the respective terminals.
Similarly, you can use the
>
[
A
!
Assistance Functions]
>
[Magn.: VF+LCD] and [Magn.: SDI/
HDMI] settings to turn the magnification function on and off on both the LCD screen and viewfinder and on
all external monitors, respectively.
- You can also use the
>
[
A "
Assistance Functions]
>
[B&W during Peaking] or
>
[
A
!
Assistance Functions]
>
[B&W during Magn.] setting to switch the camcorder's image to black &
white while using the respective assistance function.
- The assistance functions will not affect your recordings.