Canon XF705, Инструкция по эксплуатации

Страница: 105 / 231

105
Waveform Monitor
Waveform Monitor
The camcorder can display a simplified waveform monitor on the LCD screen, viewfinder and external monitors
(SDI terminal or HDMI OUT terminal).
Di s playing the Waveform Monitor
Pre ss the WFM button to di s play the waveform monitor.
• The waveform monitor window will appear at the right of the
screen.
• You can use the
>
[
A
$
* Assistance Functions]
>
[WFM: LCD], [WFM: VF], [WFM: SDI] and [WFM: HDMI]
settings to turn the waveform monitor display on and off
separately on the LCD screen, viewfinder and external
monitors connected to the respective terminals.
• You can use the
>
[
A
$
* Assistance Functions]
>
[Waveform Settings]
>
[Position] setting to display the
waveform monitor on the left/right of the screen.
* Appears on page
!
in mode.
Configuring the Waveform Monitor
1 S elect the waveform monitor' s [Type].
>
[
A
$
* Assistance Functions]
>
[Waveform Settings]
>
[Type]
2 S elect the de s ired option and then pre ss S ET.
• If you selected [Select Line], continue the procedure to set the Y coordinate of the line you wish to display.
Otherwise, skip to step 6 to change the gain.
3 To s elect the line’ s Y coordinate, s elect [ S elect Line].
>
[
A
$
* Assistance Functions]
>
[Waveform Settings]
>
[Select Line]
4 Pu s h the joy s tic k up/down to s elect the fir s t digit of the Y coordinate and then pre ss S ET to move to
the next.
• Change the rest of the digits in the same way.
• When the number of horizontal lines (vertical component) of the resolution used is 1080, you can select a
value between 0 and 1079 (1-line increments); when the vertical resolution is 2160, you can select a value
between 0 and 2158 (2-line increments).
5 S elect [ S et] and then pre ss S ET.
6 S elect [ G ain].
>
[
A
$
* Assistance Functions]
>
[Waveform Settings]
>
[Gain]
7 S elect the de s ired amplification ratio ([1x] or [2x]) and then pre ss S ET.
• If you selected [1x], the rest of the procedure is not necessary. If you selected [2x], the display range of the
waveform monitor’s Y axis will be reduced by half. Continue the procedure to select the minimum luminance
value (in %) shown on the Y axis.
Operating modes: