Canon XF705, Инструкция по эксплуатации

Страница: 61 / 231

61
Aperture
• You can operate the iris ring even the camcorder's controls are locked (
A
43).
• When an optional RC-V100 Remote Controller is connected to the camcorder, you can adjust the aperture
with the remote controller’s IRIS dial. At default settings, turn the dial right to open up the aperture and left to
close the aperture.
You can also switch between automatic and manual aperture with the remote controller's AUTO IRIS button.
Iri s Limit
By default, the iris limit is set to prevent the aperture from closing below the diffraction limit of the lens (F11).
1 S elect [Iri s Limit].
>
[
v !
Camera Setup]
>
[Iris Limit]
2 S elect the de s ired option and then pre ss S ET.
Option s
[On]: The maximum aperture value is [F11], the diffraction limit of the lens.
[Off]: You can fully close the aperture ([closed]). Aperture values that exceed the diffraction limit will
appear in gray.
NOTES NOTES
• Using aperture values that exceed the lens's diffraction limit may affect the recorded image (for example,
causing diffraction blur). Using aperture values within the lens's diffraction limit (iris limit) is recommended.
Expo s ure Compen s ation - A E S hift
Use AE shift to darken or lighten the image when you want to compensate the exposure that was set
automatically (shutter, gain or aperture set to automatic mode or after using push auto iris to automatically set
the aperture). AE shift is not available when the camcorder is set to full auto mode (
A
43) or you activate
infrared recording (
A
116).
You can also perform this function remotely using Browser Remote on a connected network device (
A
162,
168).
1 S elect [AE S hift].
>
[
v !
Camera Setup]
>
[AE Shift]
2 S elect an AE s hift level and then pre ss S ET.
• You can select one of 17 AE shift levels from –2.0 to +2.0.
NOTES NOTES
• If you set an assignable button to [AE Shift +] or [AE Shift –] (
A
117), you can press the button to adjust the
AE shift level.