Canon XF705, Инструкция по эксплуатации

Страница: 116 / 231

Infrared Recording
116
Infrared Recording
You can use the infrared mode to record in very dark situations using available infrared light. You can also use the
camcorder's infrared light to make the recordings even brighter, and select the color for the brighter areas in the
picture (white or green).
1 S et the INFRARED s witch to ON.
•
;
and
=
appear at the bottom left of the screen.
2 To change the color of highlight s in the infrared picture,
s elect [IR Rec Color].
>
[
v (
Camera Setup]
>
[IR Rec Color]
3 S elect [White] or [ G reen] and then pre ss S ET.
4 To turn on the infrared light, s elect [IR Light].
>
[
v (
Camera Setup]
>
[IR Light]
5 S elect the de s ired option and then pre ss S ET.
• When the infrared light is on,
=
changes to .
Option s
[Toggle]: Allows you to turn the infrared light on and off using an assignable button. Set an assignable
button (
A
117) to [IR Light] in advance and press the assignable button to turn the infrared light
on/off.
[Always On]: The infrared light is always on while the camcorder is in infrared mode.
[Always Off]: The infrared light is always off.
NOTES NOTES
• When infrared recording is activated, the following changes take place.
- The camcorder switches to automatic gain and shutter speed adjustment, the aperture is fixed at maximum
aperture, and the ND filter is retracted and cannot be used.
- The AGC limit, light metering, AE shift and white balance settings cannot be used.
- When the camcorder switches to infrared mode, the autofocus may be activated momentarily and the focus
point may change. Check that the focus is correct.
• Depending on the light source, autofocus may not work well while zooming.
• In infrared mode the camcorder's sensor is considerably more sensitive to near-infrared light. Do not point the
lens at strong light or heat sources when infrared recording is activated. If there are such light/heat sources in
the picture, we recommend shielding the lens before switching the camcorder to infrared mode.
• If you set an assignable button to [IR Rec Color] (
A
117), you can press the button to change the color of the
highlights in the infrared picture.
Operating modes: