Canon WFT-R10 Скачать руководство пользователя страница 152

Страница: 152 / 176

46: For the data session, error code received from FTP server

What to check on the FTP server

The connection was terminated by the FTP server.

• Restart the FTP server.

Do the user rights for accessing files on the FTP server allow reading, writing, and
log access?

• Set the user rights for accessing files on the FTP server to allow reading, writing,

and log access.

Do the user rights allow access to the target folder on the FTP server?

• Set the user rights for accessing the target folder on the FTP server to allow the

saving of images transferred from the transmitter.

Is the power of the FTP server turned on?

• Turn on the FTP server. The server may have been turned off because it is in

energy-saving mode.

Is the hard disk of the FTP server full?

• Increase available space on the hard disk.

47: Image file transfer completion not confirmed by FTP server

This error occurs if the transmitter fails to receive a transfer complete notification
from the FTP server for some reason.

• Turn off and on the FTP server and the cameras, and then retransfer the images.

48: Security of the connection to the target server cannot be verified.
If you trust this server and connect, set [Trust target server] to
[Enable].

This error appears if it was not possible to verify the safety of connection with the
destination server during FTPS connection.

• Make sure that the certificate is correctly configured.
• To trust the destination server regardless of the certificate being configured, set

[

Trust target server

] to [

Enable

152

Содержание WFT-R10

















































































































































































Результаты поиска

Содержание WFT-R10

Отзывы:

Бренды по названию

Популярные бренды

Canon WFT-R10, Руководство для продвинутых пользователей

Результаты поиска

Содержание WFT-R10

Отзывы:

Бренды по названию

Популярные бренды