Canon imageCLASS 1100, Справочное руководство

Страница: 78 / 260

Customising the Copier’s Global Settings 2-22
2
Cus
to
mis
ing S
etti
ng
s t
o Y
ou
r
Need
s
6
Select the colour to register; then press [OK].
There are four ways to select colour. (See Chapter 3, ‘Adjusting Colour and Image Quality’, in the
Copying Guide.)
- Colour Palette Selection: Select a colour from the editor’s (option) colour palette.
- Designated Colour Selection: Select a colour from the original or a colour designation sheet.
- Registered Colour Selection: Select a colour that was previously registered and stored.
- Colour Circle Selection: Select a colour from the colour circle.
To continue registering colours to other keys or making changes to the colours of other keys, repeat
steps 5 and 6.
IMPORTANT
•
If a colour is selected through the Colour Palette Selection method without carrying out a colour
palette duplication, the registered colour is colourless. In this case, always adjust the percentage of
yellow, magenta, cyan, and black. (See Chapter 3, ‘Adjusting Colour and Image Quality’, in the
Copying Guide.)
NOTE
•
Press [Erase All Settings] to erase all registered colours.
•
To erase the registered colour, make sure it is selected; then press [Erase].
7
Press [Done].
Changes to the custom sheet are stored.
8
Press [Print] located to the right of [Custom Sheet].
The custom sheet is output, reflecting the changes that were made to it.
NOTE
•
Make sure that either A3-size or A4-size paper is loaded before printing out a custom sheet.