Canon imageCLASS 1100, Справочное руководство

Страница: 113 / 260

Loading Paper 3-9
Loa
din
g P
ap
er
and
Refi
llin
g Co
ns
uma
b
le
s
3
Loading Paper in the Stack Bypass
If the stack bypass runs out of paper during a Copy job, a screen prompting you to load paper is
displayed on the touch panel display.
Follow the procedure below to load paper in the stack bypass:
CAUTION
•
When loading paper, take care not to cut your hands on the edges of the paper.
IMPORTANT
•
Note the following points when using the stack bypass:
- Copy quantity: 1 to approximately 250 sheets (80 g/m
2
),
1 to approximately 100 sheets (transparencies)
- Paper size: 305 x 457 mm paper, A3, A4, A4R,
irregular size paper (182 x 182 mm to 305 x 457 mm)
- Paper weight: 64 to 209 g/m
2
•
Curl down paper before use. There are some types of paper that may meet the above specifications
but cannot feed through the stack bypass.
•
Do not load paper of different sizes or types at the same time.
•
Only use transparencies that are specifically recommended for use with this copier.
Other transparencies may damage the copier.
•
Make sure to immediately remove transparencies or heavy paper that are output onto the output tray.
Failure to do so may result in paper jams.
NOTE
•
Refer to Chapter 2, ‘Useful Copy Functions’, in the Copying Guide for instructions on the correct way
to load transparencies in the stack bypass.