Section 4 - MultiLogger Configuration
68
MLGPS-P
User's Guide
4.4.7 Terminal
The
Terminal tab
of the Logger form is used mainly as a troubleshooting tool. This is intended to be used only
by advanced users who are familiar with a GPS receiver command system. Due to the asynchronous design of
a GPS receiver protocol, commands should be typed in the
Command
drop-down at the bottom of the form
and then the
Send Command
button should be clicked. Command history is recorded in the
Command
drop-
down and is available for later use.
(Figure 4.4.7 A ‒ The Terminal tab of the Logger form of MultiLogger, for advanced applications)
