Operation
Butzbach GmbH Industrietore
Originalbedienungsanleitung NOVOSPRINT_V1
24/02/2021
31
7.4.2 Full opening (if needed)
1.
To fully open the door: Please operate the lever again.
2.
Lock the lever with the aid of the lock attached to the side (see 7.5 Lock for emergency operation
(lever) for this).
3.
Push the door leaf open by hand.
4.
When normal operation is possible again, return the lever to its starting position and activate the
signal device. The control unit is active again and the door is ready for operation.
7.5
Lock for emergency operation (lever)
In order to fully open the door by hand, the lever for emergency operation can be locked into place.
Note!
When the lever is operated, the door opens part way. If necessary, the door can reach its full clearance
width by being pushed manually.
Note!
After putting it into operation for the first time
and
after each regular test
by a qualified individual,
the lever is sealed again.
Note!
For doors that are installed in exit and escape routes:
there is also an automatic testing of the opening function performed.
it is tested whether the defined minimum opening width, that must be reached when the door
opens independently, is reached.
Note!
This lock is particularly helpful if there is
only one person at the door
.
This lock is attached to the side of the lever.
