Operation
Butzbach GmbH Industrietore
Originalbedienungsanleitung NOVOSPRINT_V1
24/02/2021
29
1.
To
open
the door, press the ↑
OPEN
button: the door opens and stops by itself. After it reaches its
end position, it turns off automatically.
2.
The door automatically closes after
the closing delay time passes
.
7.3
Switching the system off
✔
Switch off the system after consulting with and by authorised qualified personnel.
1.
To switch off the door system, turn the main switch to position
0
for
OFF
.
2.
Secure the main switch with a hanging lock during maintenance work.
7.4
Emergency operation (lever)
In emergency situations or exceptional cases, e.g. in the event of a power outage, the door may be opened by
hand with the lever (sealed). The lever is located to the side of the door. When doing this, the safety information
and warnings below and in chapters 2 Safety and 3 Other dangers must absolutely be followed.
Important!
This device is only provided for doors that do
not
automatically open in the event of
a power outage.
Note!
Automatic closing
can be turned off with an additional input (switch) or parameter
.
This closing movement is monitored by the installed safety edge (sensitive edge).
Note!
For doors that are equipped with the
floor closure
option, the closing operation is delayed a minimal
amount of time for the lowering of the closure lip to take place.
Note!
Function
of the main switch!
The main switch fulfils the function of an
isolation device
and simultaneously serves as an
EMERGENCY
SHUTOFF
device.
Note!
Doors with the
“open without electricity” option open automatically if the power goes out.
