Control and display elements
Butzbach GmbH Industrietore
Originalbedienungsanleitung NOVOSPRINT_V1
24/02/2021
23
6
Control and display elements
6.1
Control elements
6.1.1 Definition and placement
Control elements change the functionality of the door system by changing their position or setting. The control
elements are located:
Standard:
on the front side of the control cabinet or possibly on mobile devices (e.g. remote control)
Optional:
in a separate surface-mounted housing
The control elements have different functions:
to
open
or
close
the door,
to
stop
the door at any point,
or to interrupt the
power supply
.
6.1.2 Main switch (dial)
Topic
Description
Classification
Standard
Design
Red dial on a yellow background with the functions: ON (1), OFF (0) (lockable)
Placement
Standard is on the front of the control cabinet / mains connection box.
Operation
Turn the switch
Function
Isolating device and EMERGENCY OFF control device
Result
Lock into the selected position: all poles of the system are switched to ON or OFF.
6.1.3 Control unit variants
6.1.3.1
Control unit BDC E800 F2/F4 (frequency converter control 0.75 - 2.2kW)
Diagram 6 Front side of control unit BDC-E800 F2/F4 (frequency converter control 0.75 - 2.2kW)
Topic
Description
Classification
Standard for NOVOSPRINT
®
doors Mono, Syncro und SyncroL
The control unit is not installed for FRW doors and SyncroXL.
Button ↑, 0, ↓
One control button each for the functions: Open ↑, Stop 0, Close ↓
Dial / pushbutton
Control buttons for parametrisation or requesting diagnostic information (see the
description of the BDC E800 control unit).
Main switch
To disconnect the system from the mains. It can be secured against being turned on again
with a hanging lock.
Placement
On the control cabinet
