Bush Hog BSR Series, Руководство оператора, Страница: 93 / 96

MAINTENANCE
RHP Series Rakes 03/14 Maintenance Section 5-9
© 2014 Alamo Group Inc.
MAINTENANCE
During extended periods of inactivity it is necessary to close the cylinders completely. This
must be done in is such a way as to protect the rods from weather effects.
Beginning of Season
1. Review operator’s manual and check adjustments.
2. Lubricate complete machine (See Lubrication and Maintenance Section)
3. Check air pressure in tires. Correct tire pressure is 35 psi.
4. Check all hardware for tightness.
5. If any major moving parts have been replaced make sure they run properly.
FINAL INSPECTION AND LUBRICATION
1. Attach rake to tractor (Refer to Attaching and Detaching Section in Operator’s Manual)
2. Make sure rake has enough clearance to raise and lower
3. Raise and lower rake.
4. Shut off tractor. Check hydraulic system for leaks. Oil coming out of lift cylinder vent for the first few cycles
is normal.
5. Lubricate entire machine. (See Lubrication and Maintenance Section in Operator’s Manual)
BOLT TORQUE VALUES
Because of the severe operating conditions, correct bolt torque is very important. An improperly torqued bolt
can be easily shaken loose or broken by the vibrations. When replacing bolts, always use the same grade of
bolt as used originally. Use the chart as a guide to tightening all bolts. Torque values listed are for general use
only.
Do not operate this Equipment with hydraulic oil or fuel leaking. Oil
and fuel are explosive and their presence could present a hazard. Do
not check for leaks with your hand! High-pressure oil streams from
breaks in the line could penetrate the skin and cause tissue damage
including gangrene. To check for a hose leak, SHUT the unit ENGINE
OFF and remove all hydraulic pressure. Wear oil impenetrable gloves,
safety glasses and use Cardboard to check for evidence of oil leaks. If
you suspect a leak, REMOVE the HOSE and have it tested at a Dealer.
If oil does penetrate the skin, have the injury treated immediately by a
physician knowledgeable and skilled in this procedure.
(SG-15)