Bush Hog BSR Series, Руководство оператора, Страница: 30 / 96

ASSEMBLY
BSR Series Rakes 03/14 Assembly Section 3-2
© 2014 Alamo Group Inc.
ASSEMBL
Y
GENERAL INSTRUCTIONS
Assembly must be done carefully and accurately, for the safety of the person(s) doing the assembling and to
ensure proper machine operation.
Assembly should be done on a flat, solid surface, using the proper tools and wearing suitable clothing, making
sure that all people not involved in the assembly be kept at a safe distance.
Assemblers must provide suitable lifting mechanisms and supports for stabilizing the partially assembled units,
so as too prevent them from falling and causing damage or injury.
The steps for assembly are illustrated on following pages. Depending on the experience of the assemblers and
the tools available, it is not necessary that the instructions be followed in the exact order given here, but the
safety precautions described above must always be followed carefully and scrupulously.
Before beginning operations, read the instruction manual carefully.
Before doing any maintenance or repair work, stop the machine at a suitable spot. Turn off
the tractor engine, apply the brake, remove the key from the ignition and consult this
manual.
This is a warning to use proper accident protection when carrying out maintenance and
repairs.
Indicates an imminently hazardous situation that, if not avoided, WILL result in DEATH OR
VERY SERIOUS INJURY.
Indicated an imminently hazardous situation that, if not avoided, COULD result in DEATH
or serious injury.
Indicates an imminently hazardous situation that, if not avoided, MAY result in MONOR
INJURY.
Identifies special instructions or procedures that, if not strictly observed, could result in
damage to, or destruction of the machine, attachments or the environment.