Bush Hog BSR Series Скачать руководство пользователя страница 55 | Manualshive

Страница: 55 / 96

Bush Hog BSR Series Скачать руководство пользователя страница 55

OPERATION

BSR Series Rakes 03/14

Operation Section 4-11

© 2014 Alamo Group Inc.

OPERA

T

ION

7.2 Checking Ballast, Wheel Spacing, and Tire Inflation

Provide sufficient weight to stabilize tractor when operating on hilly land or other adverse conditions. To insure
proper stability, adjust ballast, wheel spacing and tire inflation according to tractor operator’s manual.

7.1 Tractor Pre-Operation Inspection/Service

Refer to the tractor operator’s manual to ensure a
complete pre-operation inspection and scheduled
service is performed according to the
manufacturers recommendations. The following
are some of the items that require daily service and
inspection:

•

Tire condition/air pressure

•

Wheel lug bolts

•

Steering linkage

•

PTO shield

•

SMV sign is clean and visible

•

Tractor’s lights are clean and functional

•

Tractor Seat belt is in good condition

•

Tractor ROPS is in good condition

•

ROPS is in the raised position

•

No tractor oil leaks

•

Radiator free of debris

•

Engine oil level and condition

•

Engine coolant level and condition

•

Power brake fluid level

•

Power steering fluid level

•

Fuel condition and level

•

Sufficient lubrication at all lube points

•

Air filter condition

OPS-U-0030

7.3 Rake Pre-Operation Inspection/Service

Before each rake use, a complete inspection and service is required to ensure the rake is in a good and safe
working condition. Damaged and/or broken parts should be repaired and/or replaced immediately. To ensure
the rake is ready for operation, conduct the following.

OPS-RK-0001

The operator’s manual and safety signs affixed on
the unit contain important instructions on the safe
and proper use of the equipment. Maintain these
important safety features on the implement in good
condition to ensure the information is available to
the operator at all times.

•

Ensure the manual canister is secured to the
equipment with the operator’s manual inside.

•

Ensure all safety signs are in place and legible.
Replace missing, damaged, and illegible
decals.

OPS-U- 0011

«
...
53
54
55
56
57
...
»

Содержание BSR Series

































































































Отзывы:

Нет отзывов