Bush Hog BSR Series, Руководство оператора, Страница: 52 / 96

OPERATION
BSR Series Rakes 03/14 Operation Section 4-8
© 2014 Alamo Group Inc.
OPERA
T
ION
6.1 Positioning Tractor Drawbar
1. Remove locking pins (A) and move drawbar to
center position.
1. Install locking pins (A).
2. Extend drawbar away from tractor as far as
possible for better maneuverability when
attaching, detaching, and operating in the field.
3. Remove clevis assembly, if equipped.
4. If drawbar is offset, turn drawbar so offset is
down, as illustrated.
The rake can attached to any tractor having a
drawbar that conforms to ASAE-SAE standards of
330 to 559mm (13 to 22 in.) (A) from the ground.
6. CONNECTING THE IMPLEMENT TO THE TRACTOR
Use extreme caution when connecting the implements to the tractor. The implement should be securely
resting at ground level or setting on blocks. Keep hands and feet from under the units and clear of pinch
points between the tractor hitch arms and implement pins.
OPS-0011_B
Always shut the Tractor completely down, place the transmission in park, and set the
parking brake before you or anyone else attempts to connect or disconnect the Implement
and Tractor hitches.
(S3PT-15)