manualshive.com logo in svg

Bush Hog BSR Series, Руководство оператора, Страница: 88 / 96

Поделиться
Скачать
Bush Hog BSR Series Скачать руководство пользователя страница 88

MAINTENANCE

RHP Series Rakes  03/14

Maintenance Section 5-4

© 2014 Alamo Group Inc.

MAINTENANCE

Synthetic Lubricants

Conditions in certain geographical areas may require lubricant recommendations different from those printed in
this manual.

Some coolants and lubricants may not be available in your location.

Consult your dealer to obtain information and recommendations.

Synthetic lubricants may be used it they meet the performance requirements as shown in the manual.

The temperature limits and service intervals shown in this manual apply to both conventional and synthetic oils.

Refined base stock products may be used if the finished lubricant meets the performance requirements.

Lubricant Storage

•

Your equipment can operate at top efficiency only when clean lubricants are used.

•

Use clean containers to handle all lubricants.

•

Whenever possible, store lubricants and containers in an area protected from dust, moisture, and other 
contamination.

•

Make certain that all containers are properly marked to identify their contents.

•

Properly dispose of all old containers and any residual lubricant they may contain.

Rake Wheels

Every 10 Hours

Left-Hand & Right-Hand Finger

Every 50 Hours - Grease Lightly

Содержание BSR Series

































































































Отзывы:

Нет отзывов