Bush Hog BSR Series Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 96

Bush Hog BSR Series Скачать руководство пользователя страница 35

ASSEMBLY

BSR Series Rakes 03/14

Assembly Section 3-7

© 2014 Alamo Group Inc.

ASSEMBL

Y

CYLINDER LUG PLATE EXTENSION & WHEEL ARM ASSEMBLY

BSR12 MODELS

For shipping purposes the BSR12 (12 Rake Wheel Models) are shipped in the narrow position and must be
expanded for proper field operation. It will require that the left hand and right hand Wheel Arm Assemblies be
moved outward and a Cylinder Plate Extension be installed. Required parts for this operation are included in
the box of parts shipped with the machine.

This procedure should be performed on side at a time. The machine must be on solid, level
ground and the transport wheels firmly chocked with the tongue attached to the tractor to
prevent the machine from rolling during this procedure.

The Rake Wheel Pivot Arms should be raised to the transport position and the Transport
Pin and Lock Pin place in the transport position.NOTE: During this procedure the Hydraulic
Lift Cylinders will be detached from the mount lug of the Mainframe and will provide no
support to the Rake Wheel Pivot Arms.

«
...
33
34
35
36
37
...
»

Содержание BSR Series

































































































Отзывы:

Нет отзывов