manualshive.com logo in svg

Bush Hog BSR Series, Руководство оператора, Страница: 79 / 96

Поделиться
Скачать
Bush Hog BSR Series Скачать руководство пользователя страница 79

OPERATION

BSR Series Rakes  03/14

Operation Section 4-35

© 2014 Alamo Group Inc.

OPERA

T

ION

12.1 Preparing Rake for Transport

1. Park rake on level surface.

2. Engage tractor parking brake and/or place

transmission in “Park”.

3. Shut off tractor engine and remove key.

4. Make sure safety chain (A) is attached. Provide

only enough slack in chain to permit turning.

5. Put jackstand (B) in storage position.

CAUTION:

 A safety chain will help control drawn

equipment should it accidentally separate from the
drawbar. A runaway machine could cause sever
injury or death to someone. Provide only enough
slack tin chain to permit turning. Do Not use safety
chain for towing.

6. Be sure SMV emblem and reflectors are clean

and visible.

7. Clean out any crop and chaff trapped between

rake tines and frame.

8. Remove right-hand and left-hand transport lock

pins (D).

9. Raise rake wheels to their maximum height.

CAUTION: 

To avoid bodily injury or death, install

transport lock pins to prevent rake arms from
dropping during transport and colliding with vehicles
or other fixed objects.

10. Install transport lock pins (D) through arm

support brackets. Fasten with spring-locking
pins (C).

Содержание BSR Series

































































































Отзывы:

Нет отзывов