Bush Hog BSR Series, Руководство оператора, Страница: 65 / 96

OPERATION
BSR Series Rakes 03/14 Operation Section 4-21
© 2014 Alamo Group Inc.
OPERA
T
ION
8.6 Adjusting Raking and Windrow Width
The raking width is determined by the windrow width setting and the angle of raking wheels.
To change rake wheel angle, remove spring-locking pin and lock pin (A). There are four positions to increase or
decrease angle.
Changing raking width will also change the windrow width. Adjust windrow width as desired.
The rake can be set for windrow widths of 32 inches to 83 inches.
A windrow of proper width will result in more
uniform bales. The overall windrow width should be
the same size or slightly wider than the baler bale
chamber.
To improve the working capacity without change the
angle of the frames:
1. Take off lock-pin (B).
2. Slide frame (A) from standard position (D) to
high capacity position (C).
3. Insert the lock-pin (B). Repeat on opposite side.