Buell 2002 P3, Руководство по обслуживанию, Страница: 134 / 400

2002 Buell P3: Chassis 2-59
HOME
TAIL SECTION AND REAR FRAME ASSEMBLY 2.25
REMOVAL- TAIL SECTION
1. Remove seat. See 2.28 SEAT .
2. See Figure 2-102. Remove fasteners and clamp (3, 19
and 20).
3. Remove tree fasteners (2).
4. Remove tail section (1).
1 1
WARNING
1
WARNING
To protect against shock and accidental start-up of vehi-
cle, disconnect the negative battery cable before pro-
ceeding. Inadequate safety precautions could result in
death or serious injury.
5. Disconnect battery negative cable.
6. Unplug taillight.
7. Cut tie wrap holding taillight and turn signal wires.
8. Unplug turn signals.
9. Remove nut (8) and washer (7).
10. Remove turn signals (6).
11. Remove nuts and flat washers from back of taillight.
12. Remove taillight.
13. Remove bolts (4) and nuts (9).
14. Remove license plate bracket (5).
Figure 2-102. Tail Section
1. Tail Section Fairing
2. Tree Fastener
3. Bolt
4. Bolt
5. License Plate Bracket
6. Turn Signal
7. Lock Washer
8. Nut
9. Nut
10. Rear Frame
11. Bolt
12. Rear Subframe Mounting Bracket
13. Screw
14. Bushing
15. Seat Latch Lever
16. Washer
17. Seat Latch Spring
18. Bolt
19. Bolt
20. Clamp
1
7
16
17
2
3
4
5
6
8
9
10
11
12
13
20
18
19
15
14
a0146a2x