Brusa EVB1-350-40-HP, Технические данные и запуск

Страница: 73 / 98

73
Technical data
and start-up
EVB1-350/400-40-HP
10
Operation
10.1 Reading CAN Parameters
10.1.1 Debug Messages
– Data Logging with PARAM
The Debug Messages Tab lists all registered CAN messages. They are listed in the XML file. The view can be
used to see if all expected messages are on the bus. The PARAM tool can save a log file (MDF-format) of all
registered messages.
Press on the green start button to start the data
acquisition. Select a filename and press Save. The
filename will be ap-
pended by a date string. You‟ll see in
the status area if the DAQ is running. The status bar
shows the duration of the DAQ and the file size written so
far. Press the stop button to terminate the data logging. It
is very important to stop the logging prior copying or opening the file. If you try to open a non-terminated file the
data may be lost. MDF files can be opened with the CANgraph from Vector Informatik GmbH.