Brusa EVB1-350-40-HP, Технические данные и запуск

Страница: 13 / 98

13
Technical data
and start-up
EVB1-350/400-40-HP
3.3.3 Instructions for Storage and Transportation
WARNING
Overheating!
Fire hazard!

Avoid storing or operating the device in close proximity to heat sources or direct sunlight! This
will lead to the overheating of the battery and can lead to the cell packets going on fire!

Never store or transport the battery in direct contact with metal objects! This can lead to short-
circuits and then to fire!

Do not store any highly flammable materials or combustible fluids in the direct surroundings of
the device! Sparks at the device connections can set these on fire and lead to explosions!
INSTRUCTION

When storing the battery, the specified ambient temperature must always be adhered to. Storage
outside these temperatures can lead to damage to the cell packets! So the battery must be
stored in a secure environment which is inaccessible to children under the following conditions:

Ambient temperature during a storage time of < 365 days = -20°C to +25°C

Ambient temperature during a storage time of < 90 days = -20°C to +40°C

In general the cell voltage should not fall below 2.6 V. If this is the case, the battery cannot be
switched on again! In this case, a return to service can be carried out only by BRUSA experts!

In general make sure that the SoC level is at around 50% before prolonged shut-down or storage
of the battery! In the case of a complete discharge of the battery, we recommend switching off
the battery and recharging it as soon as possible so that the threshold of < 2.6 V is never fallen
short of!
INFORMATION

The battery is a dangerous good and is therefore subject to special, country-specific packaging
and labelling guidelines! Before sending the battery anywhere, find out about the necessary
transport measures from local logistics services. For instructions on the transporting of the
battery, note the reverse order of chapter
9.1.

The battery may only be sent in the transport box it was delivered in or alternatively in an
equivalent transport box. Should you have any questions, refer to the company BRUSA
Elektronik AG at the manufacturer address given in chapter
4.6 .

For safety reasons, the battery should be charged to around 50% (SoC) for transportation. Pay
attention to the charge level during the first installation and in doing so, adhere to the power data
and parameters of your charging device.

For transports after the delivery, BRUSA Elektronik AG assume no responsibility