Brusa EVB1-350-40-HP, Технические данные и запуск

Страница: 80 / 98

Technical data
and start-up
EVB1-350/400-40-HP
80
10.3.1 Configurable Parameters
INFORMATION
In this chapter, only the configurable parameters are listed. The complete CAN matrix is a part of the
customer package.
1 GENERAL PARAMETERS
NO. NAME INIT DESCRIPTION
1.4 DBG COM Master ID 0x400 ID of battery Tx message
1.5 DBG COM Slave ID 0x401 ID of battery Tx message
3 CAN1 PARAMETERS
NO. NAME INIT DESCRIPTION
3.1 Rx CMD 0x000 ID of message
0 = no function
BMS is switched on via terminal 15
3.2 Tx BCM 0x200 ID of message
0 = not sent
3.3 Tx BCM_Ah 0x201 ID of message
0 = not sent
3.4 Tx BCM_Wh 0x202 ID of message
0 = not sent
3.5 Tx CCU_V 0x300 ID of message
0 = not sent
3.6 Tx CCU_Max 0x301 ID of message
0 = not sent
3.7 Tx CCU_CELL 0x302 ID of message
0 = not sent
3.8 Tx BMS_Status 0x100 ID of message
0 = not sent
3.9 Tx BATT_Act 0x110 ID of message
0 = not sent
3.10 Tx BATT_Range 0x111 ID of message
0 = not sent
3.11 Rx NLG5_ST 0x610 ID of message NLG5_ST
0 = not sent
3.12 Tx NLG5_CTL 0x618 ID of message NLG5_CTL
0 = not sent
3.13 Rx NLG5_ACT_I 0x611 ID of message NLG5_ACT_I
0 = not sent
3.14 Baud rate 500 (1000) ---
3.15 Sampling point 68.75 ---
12 NLG
NO. NAME INIT DESCRIPTION
12.1 Mains: max. current 16.0 A Max. current from the 240 V AC network
12.2 Phase1: C-rate 0.5 C Max. charging current of phase 1
12.3 Phase1: max. cell voltage 4.15 V Max. cell voltage of phase 1
12.4 Phase1: cut-off current 2.0 A Switch to phase 2 as soon as the current has fallen below this level
12.5 Phase2: max. current 2.0 A Max. charging current of phase 2
12.6 Phase2: max. Ah 0.5 Ah Max. charging in phase 2
12.7 Phase2: max. time 180.0 min Max. charging time of phase 2