BRUEL & KJAER VIBROCONTROL 1800 Series, Инструкция по эксплуатации, Страница: 3 / 110

© Brüel & Kjær Vibro
● C106834.002 / V06 ●
Page 3 of 110
Technical alterations reserved!
Brüel & Kjær Vibro
│
Instruction VC-1800 Series Table of Contents
EN
UNRESTRICTED DOCUMENT
Table of Contents
1 Applications 6
2 VIBROCONTROL 18xx Types 7
2.1 VIBROCONTROL 18xx Structure 8
2.2 Terminal Configuration 9
2.3 VIBROCONTROL 1850 (Accelerometers CCS) 9
2.4 VIBROCONTROL 1860 (Vibration Speed Sensors) 10
2.5 VIBROCONTROL 1870 (Vibration Displacement Sensors) 10
3 Tips for Safe Operation of VIBROCONTROL 18xx 11
4 Setup and Configuration 14
4.1 Configuration of VIBROCONTROL 18xx with PC (Compact Setup Software) 14
4.2 Cable Connections 16
4.3 Powering and Starting up the Device 17
5 Functionality 18
5.1 General for VIBROCONTROL 1850 18
5.2 Functions of VIBROCONTROL 1850 18
6 Installation and Operation of VIBROCONTROL 18xx 21
6.1 General 21
6.2 "Monitor" View 22
6.3 Self-Test 22
6.4 Setting of the Outputs (Analog Output or Relay) 23
6.5 Sensors 25
6.6 VIBROCONTROL 18xx: Setting of Band-Pass Filter 1 27
6.7 VIBROCONTROL 1850: Setting of Band-Pass Filter 2 28
6.8 VIBROCONTROL 1850: Setting of the First and Second Envelope Detector 29
6.9 Bearing Damage Frequency Calculator 30
6.10 Crest Factor 33
6.11 Kurtosis 35
6.12 Process Input (with VC-1870 Input for Axial Position) 36
6.13 Rotational Speed Sensor (Tacho) Input 37
6.13.1 Rotational Speed Sensor Selection 40
6.14 Alert and Danger Alarms 40
6.15 System Error (OK) 42
6.16 Alarm Hang Time 43
6.17 Overload, Cable Short and Cable Break 43
6.18 Over Range 44