BRUEL & KJAER VIBROCONTROL 1800 Series Скачать руководство пользователя страница 71

Страница: 71 / 110

● C106834.002 / V06 ●

Page 71 of 110

Technical alterations reserved!

Brüel & Kjær Vibro

│

Instruction VC-1800 Series

Extension Modules for VIBROCONTROL

1850/1860/70

UNRESTRICTED DOCUMENT

8.2.5.6 Menu: Log

This is a "log file" for listing errors. There are no measured values here.

8.2.5.7 Menu: Firmware

If the device is functioning properly the parameter settings should be saved under "Downloads"

Click on "Generate MSE."

Mark text.

Click on the "Send to OneNote" icon.

Select the "OneNote section" to save the .MSE file.

New firmware versions can be loaded in this way. The manufacturer's
BDL or .MSE files are needed to do this. There are two different files available for an upload:

"Bundle" (pch): Specify the path to load files.

"MSE" (pch): Specify the path to load files.

Содержание VIBROCONTROL 1800 Series















































































































Результаты поиска

Содержание VIBROCONTROL 1800 Series

Отзывы:

BRUEL & KJAER VIBROCONTROL 1800 Series, Инструкция по эксплуатации, Страница: 71 / 110

Результаты поиска

Содержание VIBROCONTROL 1800 Series

Отзывы: