Page 52 of 110
© Brüel & Kjær Vibro
● C106834.002 / V06
Technical alterations reserved!
EN
Overload
When overload of both the relative shaft vibration (AC value) and the static sensor position (DC
value) is detected:
•
The analog output is 0 mA
•
A system error (OK) is activated (red LED)
Special note for peak-to-peak measurements:
•
The default setup for peak-to-peak (P-P) measurements shows an attack time of 5.0 ms and a
decay time of 2.0 s.
•
Shorter attack and decay times may lead to reduced accuracy of the measurements. This also
applies to the peak value measurement (peak) of the vibration displacement.