install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V5
7.20.2
11.
Click on the
OK
button to close the Router
Setup window.
12.
In the Input Assignments window, select the
Router Output
drop down menu for the
specific Broadcast Pix inputs that have a
router outputs attached to it.
Select the router output number 1-32, as
shown on the right.
Each router output must use a unique
number. Any locked outputs on the router
will appear red, not allowing you to change
the routed source input.
The bottom name on each source monitor
represents the assigned Router
Input/Source Name or the Broadcast Pix
Label. This name can be updated from the
Multi-View or Input Assignments window
and will automatically update on the Router.
The top name represents the Router
Output/Destination name and is
automatically feed from the Broadcast Pix to
the Router.
13.
If desired a startup assignment may be set
for each router output, under the
Default
Source
drop down menu select the desired
router input source to be used for when the
application first opens.
14.
Click on the
OK
button to save the changes,
as shown on the right.
15.
In the IO Assignments window, click on the
OK
button to close the window.