install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V5
7.17.1
7.17.1 Controlling the Streamer from the Multi-View
1.
Once an the Encoder has been selected from the
Streamer Settings window, click on the
Done
button
to apply the settings.
2.
Once a stream is ready, the Stream device window
will display
“
Ready to stream”, as shown on the
right. Click on the
Start
button to start streaming to
your CDN/server, using the settings from the
Monarch, as shown on the right.
The status will change to ‘Starting, please waiting’,
as shown on the right.
If any of the settings in the profile are not compatible
with your CDN or server within 30 seconds to 1
minute the counter will stop and the Stop button will
turn off. Check your settings to confirm that they are
match the recommended settings.
3.
The Start button will change to a Stop button and
illuminate red. In addition, the counter will start to
count up by the second, as shown on the right.
To stop streaming, click on the red
Stop
button.
