install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V5
7.11 Setting Camera Preset Positions
One of the most valuable ways to use camera control is with preset positions. Each
Hitachi camera may have up to 31 preset positions, depending on which Sony camera
being used there are up to 16 presets, depending on which Panasonic head being
used, there are up to 99 presets and depending on which Telemetrics system being
used there are up to 255 presets. These presets can be assigned to the PixPad for
rapid recall. With Telemetrics systems, timed sequences may not be stored/saved by
Broadcast Pix, this function must be done with the Studio Software CTS-ST-S. Only
snapshot presets can be saved from the Broadcast Pix.
Device Icon
indicates
Camera Control
Camera Number
Preset Position Number
On the above PixPad, the PixButtons for each Preset Position tell you the
following information. Note that each camera’s preset positions are
independent. For example, each camera can have a preset position 7 saved,
but none of these preset position 7’s are related to each other.
To assign preset positions:
1.
Select the camera you wish to add a preset position for, by pressing the
camera number PixButton, as shown on the below left. For example, for
Camera 1, press the
[Cam 1]
button and the Presets PixPad for Cam1 will
appear as shown on the lower right.
7.11
