install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V5
4.
Select the desired
Mode
to modify either Mode 1
– Mode 11, the PixButton will highlight orange,
as shown on the right.
To select Modes 12-22 select the
View Modes
12-22
button, as shown on the right.
5.
The bottom window will update to show the
current state of the mode.
In the Switcher Inputs section, click on the
input
to enable or disable 1 through 11, the PixButtons
will update to Grey or Green, as shown to the
right.
To select inputs 12-22 on + models, click on the
Shift
button, as shown on the right, and the
inputs will change showing green input numbers.
Grey PixButtons signify that the input or output is
blocked and not accessible from the Remote
Panel. Green PixButtons signify that the input or
output is allowed for selection.
The inputs shown are the direct inputs to the
Granite Switcher and the names are
automatically created from the Granite Input
Assignments window. They may not be
reordered.
6.
To assign a processed output like Program or
Preview to the A or B input buttons, click on the
A
or
B
button and a drop down menu will appear,
as shown on the right.
The list of available outputs from Granite Output
Assignments will appear, select the desired
output. The PixButton will update showing the
assigned output, as shown on the right
To access buttons C and D click on the
Shift
button and repeat this step.
4.11.8