install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V5
4.9.1
To create moves for an angle:
1.
Select the desired Angle to create moves
for in the Virtual Angles pane, the Angle
will highlight blue, as shown on the right.
2.
Click on the
Move Editor
tab, as shown on
the right.
Since any move is applied to the source
automatically, the initial saving of moves
should be done in pre-production to avoid
any on-air mistakes. Any minor
adjustments can be saved in a production.
3.
To view the positioning of your foreground
with the background, it is recommended to
put the source angle in preview to see the
composition. Either manually place the
source in
Preview
or select the
View On
Preview
button in the Move Editor tab, as
shown on the right.
4.
Depending on the background selected for
the Virtual Set, the foreground talent may
need to be positioned and sized to fit
properly in the set. Click on the
Foreground
radio button, as shown on the
right.
5.
Position the foreground video using the
X
and
Y
sliders.
6.
Size the foreground video using the
Z
slider.
As the example on the right shows, you
can easily move your talent to make the
background monitor visible.