bpr Rotax 912 i Series, Руководство по обслуживанию, Страница: 400 / 458

Effectivity: 912 i Series
Edition 1/Rev. 0
d0
535
5.
fm
MAINTENANCE MANUAL
BRP-Powertrain
76-70-00
Page 20
July 01/2012
TEMPERATURE SENSOR (EGT 1, EGT 2, EGT 3, EGT 4) - INSPECTION
KNOCK SENSOR (KNOCK) - INSPECTION
Preparation
Carry out a general visual inspection:
Check that the sensor is securely fitted.
- Corrosion or damage to the wiring, connector
contacts or connections
Voltage and resistance test
cannot be tested
CRANKSHAFT POSITION SENSOR
(CPS_1/CPS_2
- INSPECTION
Preparation
Carry out a general visual inspection:
- Check that the sensors are fitted securely.
- Corrosion or damage to the wiring, connector
contacts or connections
- Check the O-ring on the crankshaft position
sensor
- Check the thread
- Check the crankshaft position sensor surface
- Check the crankshaft position sensor bore
Voltage and resistance test
- cannot be tested
Temperature sensor (EGT 1, EGT 2, EGT 3, EGT 4)
Measurement
Temperature [°C/°F] Resistance [Ω]
-40 °C/-40 °F 169,7
0/32 °F 200,5
50 °C/122 °F 238,5
100 °C/212 °F 275,9
200 °C/392 °F 349
300 °C/572 °F 419,7
500 °C/932 °F 534,1
1
2
1
2
06345
06354
Knock sensor
Measurement
Position Resistance [Ω]
Between PIN1 and
PIN 2
4 bis 10 MΩ
Between PIN and
housing
> 1 MΩ
1 2
1
2
06358
06354