bpr Rotax 912 i Series, Руководство по обслуживанию, Страница: 377 / 458

Effectivity: 912 i Series
Edition 1/Rev. 0
d
059
40.
fm
MAINTENANCE MANUAL
BRP-Powertrain
76-50-00
Page 19
July 01/2012
AIRBOX PRESSURE SENSOR AND TEM-
PERATURE SENSOR - CONNECTION
The sensors are connected and disconnected in
the same way. See section 76-50-00 Removal.
KNOCK SENSOR - CONNECTION
The sensors are connected and disconnected in
the same way. See section 76-50-00 Removal.
CRANKSHAFT POSITION SENSOR -
CONNECTION
The sensors are connected and disconnected in
the same way. See section 76-50-00 Removal.
Note:
- CPS_1 for LANE A (upper crankshaft position
sensor)
- CPS_2 for LANE B (lower crankshaft position
sensor)
NOTE:
The sensors are identical, they are not
labelled.
TEMPERATURE AND PRESSURE SEN-
SOR (OIL) - CONNECTION
The sensors are connected and disconnected in
the same way. See section 76-50-00 Removal.
THROTTLE POTENTIOMETER - CONNEC-
TION
The sensors are connected and disconnected in
the same way. See section 76-50-00 Removal.
TEMPERATURE SENSOR CTS AND IN-
JECTOR - CONNECTION
The sensors are connected and disconnected in
the same way. See section 76-50-00 Removal.
Note:
Fig. 35
6 881306 Crimping pliers TYCO 539 635-1
Jaws TYCO 539 737-2
Disassembly tool DELPHI 12094429
7 881308
8 881302 Crimping pliers DELPHI 12155975
Disassembly tool DELPHI 12094429
9 881304
10 881294 Crimping pliers MOLEX 0638114400
Disassembly tool MOLEX 63813-1500
11 881312 Crimping pliers TYCO 58495-1‘
Disassembly tool TYCO 305 183
12 881310 Crimping pliers TYCO 180319
Pos. Part no. of connector set Corresponding tool
m
WARNUNG
NOTICE
Do not clamp the cables for INJ_4 and CTS
(Coolant Temperature Sensor) together.
Step Procedure
1 Screw on the cable clamp finger-tight with
an M6x14 screw and 6.4 washer.
2 Plug in the temperature sensor with the
CTS cable.
1. Temperature sensor CTS 2. INJ_4