bpr Rotax 912 i Series, Руководство по обслуживанию, Страница: 211 / 458

Effectivity: 912 i Series
Edition 1/Rev. 0
d
053
45.
fm
MAINTENANCE MANUAL
BRP-Powertrain
72-30-00
Page 29
July 01/2012
Fig. 48
FINISHING WORK
- Install the coolant hoses to the inlet and outlet
elbow. See also section 75-00-00 Cooling
system.
- Install the intake manifold. See also section
73-00-00 Fuel system.
- Form the connection to the airbox. To do this,
see section 73-10-00 Fuel pump and distribu-
tion.
- If necessary, install the knock sensor of cylin-
der 1.
- Install the fuel rail assy. To do this, see sec-
tion 73-10-00 Fuel pump and distribution.
- Install the spark plugs and connect the resi-
stance spark plug connectors. See also sec-
tion 74-20-00 Distribution.
- Install the temperature sensor and connect
the wiring harness. To do this, see section 76-
70-00 Sensors and actuators.
- Install the fuel line inlet and outlet. To do this,
see section 73-10-00 Fuel pump and distribu-
tion.
- Install the exhaust system. See also section
78-00-00 Exhaust.
- Connect the wiring harness. See also section
76-00-00 Wiring harness.
Step Procedure
1 Install the 105x2.5 O-ring and the 6.4x1.8
O-ring in the valve cover.
2 Place on the valve cover and fasten it with
an M6x30 Allen screw and washer.
Tightening torque 12 Nm (106.18 in. lb.).
1. M6x30 Allen screw 2. 6/12/1 washer
3. Cylinder head cover 4. 6.4x1.8 O-ring
5. 105x2.5 O-ring