bpr Rotax 912 i Series, Руководство по обслуживанию, Страница: 119 / 458

Effectivity: 912 i Series
Edition 1/Rev. 0
d
059
33.
fm
MAINTENANCE MANUAL
BRP-Powertrain
71-00-00
Page 11
July 01/2012
SERIAL AND PART NO.
The parts are labelled with serial and part num-
bers.
NOTE:
If additional parts are purchased, part
of the serial and part numbering of the
aeronautical equipment manufactu-
rer is included.
SERIAL NUMBER
The number system for the serial number con-
sists of a two-digit number block and a four-digit
number block with a point separating them.
The first number block of the serial number indi-
cates the year of manufacture, the second is a
consecutive number.
e.g. serial number
PART NO.
The part number consists of a simple six-digit
number block.
This number block is a consecutive number.
e.g. part no.
ENGINE COMPONENTS, ENGINE VIEWS,
CYLINDER DESIGNATION AND DEFINITI-
ON OF MAIN AXES
Firing order 1-4-2-3
Spark plugs 12 mm, DCPR8E
Electrode gap See section 74-00-00
Integrated generator Permanent magnet single-
phase generator
Rectifier regulator 12 V 20 A DC
External generator
(optional extra) Full-wave rectifier with 12 V
40 A DC serial regulator
Fuel pumps 2 electric fuel pumps
Starter Electric starter, 12 V/0.8 kW
Propeller gearbox Integrated gearbox with me-
chanical vibration damping
and overload clutch
Gear transmission 2.43
06310
PTO Power take off side
MS Magneto side
A Suspension point (for transport)
Center of gravity
P Zero reference point (starting point for all
dimensions)
NOTE: Allow ± 1 mm on all stated di-
mensions as manufacturing
tolerance.
x, y, z Coordinate system axes
Cyl. 1 Cylinder 1
Cyl. 2 Cylinder 2
Cyl. 3 Cylinder 3
Cyl. 4 Cylinder 4
06311