Boss Snowplow Snowrator SNR24001, Руководство пользователя

Страница: 28 / 48

Lubrication
Greasing the Motion
Controls
Service Interval: Yearly—Grease the motion controls.
Grease the motion-control bushing for both levers.
Note:
Use an oil drip between the lever brackets to
grease the bushing, located in the pivot tube.
g294665
Figure 32
1. Drip oil between the pivot tube and bushing.
Engine Maintenance
Engine Safety
•
Shut off the engine before checking the oil or
adding oil to the crankcase.
•
Keep your hands, feet, face, clothing, and other
body parts away from the muffler and other hot
surfaces.
Servicing the Air Cleaner
Service Interval: Before each use or daily—Inspect
the air-cleaner elements.
Every 50 hours/Every 3 months (whichever
comes first)—Clean the air-cleaner elements.
Every 300 hours/Yearly (whichever comes
first)—Replace the paper air-cleaner element.
Important:
Do not operate the engine without
the air-filter assembly; extreme engine damage
will occur.
1. Shut off the engine and wait for all moving parts
to stop.
2. Disconnect the wire from the spark plug; refer to
Disconnecting the Spark-plug Wire (page 27) .
3. Remove the nut that secures the cover ( Figure
33 ).
28