Boss Snowplow Snowrator SNR24001, Руководство пользователя

Страница: 33 / 48

g295395
Figure 41
1. Fuel-shutoff valve 3. Fuel filter
2. O-ring 4. Sediment cup
3. Unscrew the sediment cup ( Figure 41 ).
4. Remove the fuel filter and O-ring ( Figure 41 ).
Note:
Do not misplace the O-ring.
Note:
Do not clean the O-ring in solvent.
5. Clean the fuel filter and sediment cup using a
nonflammable solvent, and dry it carefully.
6. Wipe the O-ring with a clean, dry cloth.
7. Install the fuel filter in the bottom of the
carburetor (
Figure 41 ).
8. Align the O-ring in to the groove in the sediment
cup and install the sediment cup to fuel valve
housing.
9. Move the fuel-shutoff valve to the O
PEN
position
and check for leaks. If it leaks, replace the
O-ring.
Electrical System
Maintenance
Electrical System Safety
•
Disconnect the battery or remove the spark-plug
wire before making any repairs. Disconnect the
negative terminal first and the positive terminal
last. Connect the positive terminal first and
negative last.
•
Charge the battery in an open, well-ventilated
area, away from sparks and flames. Unplug the
charger before connecting or disconnecting the
battery. Wear protective clothing and use insulated
tools.
Servicing the Battery
Service Interval: Every 100 hours—Check the
battery.
Always keep the battery clean and fully charged. Use
a paper towel to clean the battery case. If the battery
terminals are corroded, clean them with a solution of
four parts water and 1 part baking soda. Apply a light
coating of grease to the battery terminals to prevent
corrosion.
Voltage: 12 V
Removing the Battery
1. Remove the cover of the battery box.
g294666
Figure 42
1. Battery box cover
2. Disconnect the negative (black) ground cable
from the battery post.
33