Boss Snowplow Snowrator SNR24001, Руководство пользователя

Страница: 35 / 48

Install the battery as shown in Figure 44 .
g294507
Figure 44
1. Negative (black) 2. Positive (red)
1. Place the battery on the machine.
2. Connect the positive (red) battery cable.
3. Connect the negative (black) battery cable.
4. Install the cover of the battery box.
Servicing the Fuses
The electrical system is protected by fuses. It
requires no maintenance. If a fuse blows, check the
component or circuit for a malfunction or short.
Replacing the In-Line Fuses
There are 2 replaceable in-line fuses on the wire
harness.
1. Remove the cushion.
2. Find the in-line fuse on the wire harness and
remove the fuse cap.
g295779
Figure 45
1. In-line fuse
3. Remove and inspect the fuse.
If the fuse is burnt out, discard it and install a
new fuse with the same rating; refer to the table
below.
Important:
Do not use a fuse with a rating
higher than the original fuse; serious damage
to the electrical system or a fire could result.
Light fuse Accessory fuse
10 A 30 A
4. Install the fuse cap and cushion.
Replacing the Engine Fuse
The engine has a fuse ( Figure 46 ) that protects the
key-start relay circuit and the battery-charging circuit.
If the fuse burns out, the key starter will not work. You
can still start the engine with the recoil-start handle,
but the engine will not charge the battery.
35