Boss Snowplow Snowrator SNR24001, Руководство пользователя

Страница: 34 / 48

WARNING
Incorrect battery cable routing could
damage the machine and cables, causing
sparks. Sparks can cause the battery
gases to explode, resulting in personal
injury.
• Always disconnect the negative
(black) battery cable before
disconnecting the positive (red)
cable.
• Always connect the positive (red)
battery cable before connecting the
negative (black) cable.
WARNING
Battery terminals or metal tools
could short against metal machine
components, causing sparks. Sparks
can cause the battery gases to explode,
resulting in personal injury.
• When removing or installing the
battery, do not allow the battery
terminals to touch any metal parts of
the machine.
• Do not allow metal tools to short
between the battery terminals and
metal parts of the machine.
3. Remove the positive (red) battery cable.
4. Remove the battery.
Charging the Battery
WARNING
Charging the battery produces gasses that
can explode.
Never smoke near the battery and keep sparks
and flames away from battery.
Important:
Always keep the battery fully charged
(1.265 specific gravity) to prevent battery damage
when the temperature is below 0°C (32°F).
1. Remove the battery from the chassis; refer to
Removing the Battery (page 33) .
2. Check the electrolyte level.
3. Ensure that the filler caps are installed on the
battery.
4. Charge battery for 10 to 15 minutes at 25 to 30
amps or 30 minutes at 10 amps.
5. When the battery is fully charged, unplug the
charger from the electrical outlet, and disconnect
the charger leads from the battery posts (
Figure
43 ).
6. Install the battery onto the machine and connect
the battery cables; refer to
Installing the Battery
(page 34) .
Note:
Do not run the machine with the battery
disconnected; electrical damage may occur.
g000538
Figure 43
1. Positive battery post 3. Red (+) charger lead
2. Negative battery post 4. Black (-) charger lead
Installing the Battery
WARNING
Incorrect battery cable routing could damage
the machine and cables, causing sparks.
Sparks can cause the battery gases to
explode, resulting in personal injury.
• Always disconnect the negative (black)
battery cable before disconnecting the
positive (red) cable.
• Always connect the positive (red) battery
cable before connecting the negative
(black) cable.
WARNING
Battery terminals or metal tools could short
against metal machine components, causing
sparks. Sparks can cause the battery gases
to explode, resulting in personal injury.
• When removing or installing the battery,
do not allow the battery terminals to touch
any metal parts of the machine.
• Do not allow metal tools to short between
the battery terminals and metal parts of the
machine.
34