Boss Snowplow Snowrator SNR24001, Руководство пользователя

Страница: 39 / 48

Plow Maintenance
Checking the Cutting Edge
Service Interval: Before each use or daily—Check
the cutting edge for wear.
If your plow has a steel cutting edge and it appears
worn, purchase a new cutting edge. If your plow has
a urethane cutting edge and 1 side is worn, flip the
cutting edge; refer to
Flipping the Urethane Cutting
Edge (page 39) . If both sides of the urethane cutting
edge are worn, purchase a new cutting edge.
Flipping the Urethane
Cutting Edge
1. Remove and retain the bolts and locknuts
securing the cutting edge to the blade (
Figure
52 ).
g295605
Figure 52
1. Carriage bolt 4. Blade
2. Metal strap 5. Locknut
3. Urethane cutting edge
2. Flip the cutting edge and line it up with the holes
in the blade.
3. Secure the cutting edge with the previously
removed bolts, washers, and locknuts.
4. Torque the fasteners to 76 N∙m (56 ft-lb).
39