Problem
Possible Cause
Corrective Action
1. The sprayer valve is closed.
1. Open the sprayer valve.
2. The sprayer filter is clogged.
2. Clean the sprayer filter.
3. The brine in the hoses is frozen.
3. Bring the machine to a warm area to
thaw.
The sprayer pump does not prime.
4. The sprayer filter O-ring is damaged
or missing.
4. Replace the O-ring.
1. The spray nozzles are plugged or
frozen.
1. Clean the spray nozzles.
The sprayer pump runs and shuts off
repeatedly.
2. The brine in the hoses is frozen.
2. Bring the machine to a warm area to
thaw.
1. The sprayer valve is closed.
1. Open the sprayer valve.
2. The sprayer filter is clogged.
2. Clean the sprayer filter.
3. The spray nozzles are plugged or
frozen.
3. Clean the spray nozzles.
4. The brine in the hoses is frozen.
4. Bring the machine to a warm area to
thaw.
The sprayer is not spraying.
5. The hoses are clogged.
5. Clean the hoses.
1. The sprayer valve is open.
1. Close the sprayer valve.
Brine is dripping from the spray nozzles
when the system is not in use.
2. The sprayer in-line filter O-ring is loose,
damaged, or missing.
2. Tighten the in-line filter or replace the
O-ring.
Too much brine is being sprayed.
1. The sprayer throttle is set too high.
1. Turn the sprayer throttle counter
clockwise to decrease the flow.
Too little brine is being sprayed.
1. The sprayer throttle is set too low.
1. Turn the sprayer throttle clockwise to
increase the flow.
44
Содержание Snowrator SNR24001
Страница 24: ...g294661 g294662 Figure 29 1 Front tie down point left side shown 2 Rear tie down points 24...
Страница 45: ...Notes...
Страница 46: ...Notes...
Страница 48: ......
