Boss Snowplow Snowrator SNR24001, Руководство пользователя

Страница: 27 / 48

Pre-Maintenance
Procedures
Preparing the Machine for
Maintenance
1. Park the machine on a level surface.
2. Move the motion-control levers to the N
EUTRAL
position.
3. Disconnect the kill cord from the operator
presence sensor to shut off the engine.
4. Wait for all moving parts to stop.
5. Remove the key.
6. Disconnect the spark-plug wire.
7. Allow machine components to cool.
8. Chock the tires.
Disconnecting the
Spark-plug Wire
Disconnect the spark-plug wire from the terminal of
the spark plug.
g019281
Figure 30
1. Spark plug
Removing the Cushion for
Rear Access
You can release the cushion for rear access to the
machine for maintenance or adjustment.
1. Lift up on the bottom of the cushion until you can
pull it back and away from the machine (
Figure
31 ).
g294664
Figure 31
2. Perform any maintenance or adjustment on the
machine.
3. Slot the cushion brackets into the frame and
lower the cushion.
27