Boss Snowplow Snowrator SNR24001, Руководство пользователя

Страница: 36 / 48

g023983
Figure 46
1. Fuse cap 4. Screw
2. Key-switch housing 5. Fuse
3. Rear cover
1. Remove the screw from the rear cover of the
housing behind the key switch.
2. Remove the rear cover.
3. Remove the fuse cap, then remove and inspect
the fuse.
If the fuse is burnt out, discard it and install
a new fuse with the same rating; refer to the
engine owner’s manual.
Important:
Do not use a fuse with a rating
higher than the original fuse; serious damage
to the electrical system or a fire could result.
4. Install the rear cover, and secure it with the
screw.
Drive System
Maintenance
Checking the Tire Pressure
Service Interval: Every 50 hours/Monthly (whichever
comes first)—Check the tire
pressure.
Maintain the air pressure in the tires at 124 kPa (18
psi).
g001055
Figure 47
Checking the Wheel
Fasteners
Service Interval: Monthly—Check the wheel-lug
nuts.
Monthly—Check the hub castle-nut cotter pin.
Check and torque the wheel-lug nuts to 115 N∙m (85
ft-lb).
Check the condition of the hub castle-nut cotter pin.
36