manualshive.com logo in svg

Bosch Rexroth Servodyn-D Series, Руководство по обслуживанию, Страница: 66 / 74

Поделиться
Скачать
Bosch Rexroth Servodyn-D Series Скачать руководство пользователя страница 66

Electric Drives

and Controls

6–1

Bosch Rexroth AG

Servodyn-D

1070 066 032 / 03

Replacing components

6

Replacing components

DANGER

Danger caused by unqualified interventions.

The maintenance and installation of the components is reserved

to qualified personnel who observes the accident prevention reg-

ulations (UVV VBG4, VDE 100, VDE 105) and installation standards

(EN 60204-Part 1, prEN 50178).

Please note the safety instructions on the first pages of this manual!

6.1

Motors

DANGER

Brakes are subject to wear.

The holding brake is no service brake and must only be operated

when the axis is at standstill.

After approx. 1000 Emergency-Stop braking processes with an ex-

traneous moment of inertia 

x

 motor moment of inertia, the hold-

ing brake must be checked in the manufacturer’s workshop.

DANGEROUS ELECTRICAL VOLTAGE

All connection and installation work must be performed while the

system is de-energized.

Due to permanent magnet excitation, a dangerous voltage is pres-

ent at the power outlet when the rotor is rotating and the motor is

not connected electrically!

DANGER

Danger of injuries by ejected featherkey.

Motors with a groove and featherkey may only be operated when

installed in place or with featherkey secured.

CAUTION

Damages to the module or inverter by removing plug-in connec-

tions.

All plug-in connections to the encoder may only be inserted or re-

moved while the drive is switched off.

Содержание Rexroth Servodyn-D Series











































































Отзывы:

Нет отзывов