Milling machine (HCQ) - Milling
Automation (HCT) - 3 axes
System axis
Phys. Name
Sercos address
Connection
Dr[1]
X
1
X5.1
Dr[2]
Y
3
X5.3
Dr[3]
Z
4
X5.4
Dr[4]
-
-
-
Tab. 8-3:
Predefined axis configurations
Fig. 8-9:
Parameter axis assignment
The axis is assigned to a specific connection by changing the Sercos address
(MAIN/Dr[i]/Scs/ScsAddr).
Parameters for linear axes
Now set the traversing range limits, the velocity and the acceleration.
Relations are shown in the following figures:
Fig. 8-10:
Schematic diagram 1
DOK-MTXMIC-EASY*******-CO06-EN-P
Bosch Rexroth AG
95/177
IndraMotion MTX micro Easy Setup for Standard Turning and Milling Machines
NC parameterization
