8.2.5
Parameter description/Help
Parameters are explained under "information":
Fig. 8-6:
Parameter description and help
8.3
Basic configuration
8.3.1
Introduction
The basic setting of the machine is made and/or checked in the "configura‐
tion parameters".
Proceed as follows:
1. Configuration parameters
2. Basic NC configuration (MAIN)
Checking the drive assignment
Open nodes Dr[1] to Dr[4].
Check the assignment of the drives to the machine (see fig. 4-2):
1.
Number of NofCh channels (usually one channel)
2.
Number of NofDr NC axes (4 in case of HCQ and 3 in case of HCT con‐
trollers)
3.
Number of NofDrNodes drives
4.
Node SpFunc indicates that this drive is a spindle
DOK-MTXMIC-EASY*******-CO06-EN-P
Bosch Rexroth AG
91/177
IndraMotion MTX micro Easy Setup for Standard Turning and Milling Machines
NC parameterization
