BMW 01 40 2 960 980, Руководство пользователя

Страница: 88 / 156

▷ Duration for passkey input takes longer
than 30 seconds? Repeat the connection
attempt.
▷ Does the control number on the mobile tel‐
ephone and vehicle agree? Repeat the
connection attempt.
▷ Too many Bluetooth devices paired to the
mobile telephone or the vehicle? If neces‐
sary, delete connection with other devices.
▷ Is Bluetooth audio activated? Deactivate
Bluetooth audio.
▷ Is the mobile telephone in power-save
mode or is the battery low? Charge the
mobile telephone using the snap-in
adapter or the charging cable.
▷ If appropriate, only one mobile telephone
can be connected to the vehicle, depend‐
ing on the mobile telephone. De-register
the mobile telephone from the vehicle and
only register and connect one mobile tele‐
phone.
The mobile telephone is no longer responding.
▷ Switch the mobile telephone off and on
again.
▷ Too high or low ambient temperatures? Do
not subject the mobile telephone to ex‐
treme ambient conditions.
Telephone functions not possible.
▷ Configure mobile telephone and connect
with the telephone or telephone 2 function.
No phone book entries, not all entries or in‐
complete entries are displayed.
▷ Transfer of the phone book entries has not
been completed.
▷ Under certain circumstances only the
phone book entries saved in the mobile
phone or on the SIM card are transferred.
▷ It might be that phone book entries with
special characters cannot be displayed.
▷ Number of phone book entries to be stored
is too high.
▷ Data volume of the contact too large, for
example due to stored information such as
notes? Reduce data volume of the contact.
▷ Mobile telephone connected as audio
source? Configure mobile telephone and
connect to telephone or telephone 2 func‐
tion.
Quality of the phone connection is poor.
▷ Bluetooth signal strength can be adjusted
on mobile telephone, depends on the
model.
▷ Place the mobile telephone in a snap-in
adapter or close to the centre console.
▷ Adjust the volume of the microphone and
speaker separately.
If all the points on the list have been reviewed
and the desired function cannot be run, con‐
tact the Hotline or Service Centre.
Controls
Adjusting the volume
During active call, turn volume button on radio
to set desired volume. The setting is stored for
the currently used profile.
Automatic volume equalisation
The vehicle adjusts the volume of the micro‐
phone on the telephone and the volume of the
other party automatically. Depending on the
mobile telephone, it may be necessary to
adapt the volumes. Settings are possible only
during a call and must be adjusted separately
for each mobile telephone. The settings are
deleted as soon as the mobile telephone is de-
registered.
On the Control Display:
1. "Settings"
2. "Sound"
3. "Volume settings"
Seite 88
Communication Telephone
88
Online Edition for Part no. 01 40 2 960 980 - II/15