BMW 01 40 2 960 980, Руководство пользователя

Страница: 140 / 156

LED above the WLAN button lights up
green.
2. Start the program on the device to set up
wireless network, see Owner's Handbook
of the device.
3. Select from the list of wireless networks
"BMW Wireless" within range of the snap-
in adapter and connect.
4. Enter WPA2 key.
Bottom LED above WLAN button on the
snap-in adapter is illuminated green if a
connection has been established.
Configuring connection to the Internet
To establish a connection to the Internet you
must configure the snap-in adapter.
1. Start Internet browser on the device.
2. Enter the following URL in the Internet
browser's URL line: http://192.168.1.1
The "Connectivity SIA" page is displayed.
3. Select "WAN".
4. Input data. Data is provided by the service
provider.
"APN": access point of the service pro‐
vider.
"Username": user name.
"Password": password.
5. Confirm with "Submit".
6. Select"WLAN".
7. The name of the snap-in adapter is stated
in the "SSID" field. You can individually
adapt this name, if required.
8. Keep all other settings.
Resetting WLAN settings
WLAN settings of the snap-in adapter are re‐
set to factory settings. The configuration must
be set again.
Press and hold WLAN button for ap‐
proximately 9 seconds until the bot‐
tom LED over the button flashes red. Subse‐
quently let go of the button.
Switching WLAN on the snap-in
adapter on and off
To switch on: press WLAN button un‐
til bottom LED is illuminated green.
To switch off: press and hold WLAN button un‐
til bottom LED flashes green and then goes off.
What to do if...
▷ No connection to the Internet can be es‐
tablished.
Check whether WLAN is switched on at
the snap-in adapter and on the device.
▷ WLAN switched on on the snap-in adapter
and the device and no connection to the
Internet can be established.
The UMTS network may be busy. In such a
case, change to another network, see
page
137 , GSM.
Status LEDs
Top LED above
WLAN button Meaning
Illuminates yel‐
low. Internet connection via
GSM, 2G.
Illuminates
green. Internet connection via
UMTS, 3G.
Bottom LED
above WLAN
button Meaning
Does not light
up. WLAN deactivated.
Illuminates
green. WLAN is activated.
Seite 140
Communication Rear telephone
140
Online Edition for Part no. 01 40 2 960 980 - II/15