Configuring the Gigabit Ethernet Interfaces
System Administration Manual
67
To Delete an Aggregation
1.
Select the aggregation from the list.
2.
Click
Delete
.
Note:
In order to delete a link aggregation group, all IP addresses and GE
ports associated with the LAG must first be removed.
To View an Aggregation’s Status
From the
Network Configuration
page, click
Link Aggregation Status.
Item/Field
Description
Aggregations
Name of the aggregation (ag1, ag2, ag3, ag4, ag5, ag6).
Interface
The list of GE ports. They will appear next to their configured
aggregation.
<server name>
•
Up: The port on Titan is physically connected to the switch and is
able to send and receive incoming data.
•
Attached (LACP only): The port on Titan is physically connected to
the switch. Traffic not passing across the link. Ports in this mode
are typically running as the standby ports in 3+3 or 5+1 groups.
•
Detached (LACP only): The port on Titan is physically connected to
the switch. Traffic not passing across the link. This state is a
transient LACP state and may be seen prior to a port becoming
attached.
•
Down: There is no physical connection between the port on Titan
and the switch.
Содержание Titan SiliconServer
Страница 1: ...Titan SiliconServer System Administration Manual ...
Страница 12: ...Table of Contents xii Titan SiliconServer ...
Страница 308: ...File Services 296 Titan SiliconServer 4 Click OK To access available iSCSI Targets 1 Click on the Available Targets tab ...
Страница 411: ...Status Monitoring 399 Titan SiliconServer 3 Click details ...
