Blue Arc Titan SiliconServer, Руководство системного администратора

Страница: 35 / 487

Configuring the System Management Unit (SMU)
System Administration Manual 23
In the Actions frame it is possible to add or remove managed servers from the displayed list.
To remove one or more servers, make a selection by putting a tick in the appropriate checkbox,
or click
check all to remove all servers. Then, click remove .
Tip: To change the current managed server, click Set as Current on this
page or use the drop-down box in the Server Status Console.
To add a server, click add . The following screen will be displayed:
This screen requires the following:
When all the details have been entered, click OK .
When the Titan is added to the SMU as a Managed SiliconServer , the following actions will
Set as Current Select the server as the currently managed server.
Item/Field Description
SiliconServer IP Address Enter the IP address of the server to be added. For Titan, this is the
IP address used for server administration, typically assigned to the
10/100 management port.
SiliconServer Username Enter the username needed to access this server, e.g. supervisor.
SiliconServer Password Enter the password needed to access this server.